The Power Guillotine Shears has a enbloc frame, made of electrically welded steel sheets. Coupling and self-adjustable pneumatic brake; with remote control by pedal-operated pushbuttons; possibility of presetting single stroke or continuous cycle operation. Upper one-piece blade-holder made of high-resistance steel holder guided on wall sides on large adjustable gibs. Reverse blades with two cutting edges made of special steel. Minimum inclination of the blades to obtain a clean cut without deformation also of very narrow strips. The sheet down holder is of the rigid type and allows a perfect holding of the metal sheet, even in case of differences in thickness or light ondulations of the sheet. The single rams are equipped with inserts of Neoprene. The recess in the uprights allows subsequent cutting of indefinite long strips having a width corresponding to the depth of the recess. Centralized lubrication with automatic delivery of oil to all moving machine components. The machines are provided with a pedal operating device having low-voltage tension.
Standard equipment: 2 front extensions – 2 fixed rules – 1 movable rule -1 rear gauge – set of spanners.
Click here to view other products
|Useful length mm||1050||2050|
|For sheet thickness R = 40 kg/mm2 up to mm||3||4|
|Depth of groove mm||200||200|
|Adjustment of gauge mm||500||500|
|Cuts per min n.||65||60|
|Horsepower of motor kW||2.2||4|
|Weight circa kg||1200||2800|